Quick Conversions
Zinc Price — 10-Day Trend
All prices in ₹ per gram · daily rate, updated once per day
The Zinc Most People Never Notice
Galvanizing gets most of the attention when people talk about industrial zinc demand, and for good reason — it's the single largest use of the metal worldwide. But run your hand over a door handle, a small engine bracket, or the metal housing on a piece of electronics, and there's a real chance you're touching zinc in an entirely different form: a die-cast part, made from a zinc alloy rather than a zinc coating. At today's rate of ₹0.33 per gram, that alloy is built from the same underlying metal tracked on this page.
Die casting is a manufacturing process: molten metal gets injected under high pressure into a reusable steel mold — the "die" — to produce precise, smooth-finished parts at high volume. Zinc has become one of the preferred metals for this process for reasons that come down to basic materials science.
- Low melting point: zinc alloys melt at a relatively low temperature, extending die life and speeding up cycles
- Zamak: the most common zinc die-casting alloy family — zinc plus small amounts of aluminium, magnesium and copper
- Typical parts: automotive brackets and handles, door hardware, electronics housings, plumbing fixtures
Zinc Price by Weight
Today's Zinc rate is Less than One Rupees per gram. At this rate, 10 grams of Zinc costs Three Rupees.
| Unit | Weight | Price (INR) | Price in Words |
|---|---|---|---|
| 1 Gram | 1.0000 g | ₹0.33 | Less than One Rupees |
| 8 Grams | 8.0000 g | ₹2.67 | Three Rupees |
| 10 Grams | 10.0000 g | ₹3.34 | Three Rupees |
| 100 Grams | 100.0000 g | ₹33.38 | Thirty Three Rupees |
| 1 Kilogram | 1,000.0000 g | ₹333.77 | Three Hundred and Thirty Four Rupees |
| 1 Ounce (oz) | 28.3495 g | ₹9.46 | Nine Rupees |
| 1 Troy Ounce | 31.1035 g | ₹10.38 | Ten Rupees |
| 1 Metric Ton | 1,000,000.0000 g | ₹333,767.00 | Three Lakh Thirty Three Thousand Seven Hundred and Sixty Seven Rupees |
Why Zinc Beats the Alternatives for This Job
Aluminium and steel can both be die-cast too, and for larger or higher-stress parts, they often are. Zinc's advantage shows up specifically at the smaller, more intricate end of the parts spectrum. Its lower melting point means the die itself — an expensive piece of precision tooling — lasts through far more casting cycles before wearing out than a die used for a higher-temperature metal would. That translates directly into lower tooling cost per part, which matters enormously in high-volume manufacturing where millions of identical small components get produced from the same die.
Precision is the other half of the story
Zinc alloys also flow exceptionally well when molten, filling thin walls and fine detail in the die more completely than many alternatives. That lets manufacturers hold tighter dimensional tolerances and produce thinner walls without sacrificing strength — genuinely useful for parts like small gears, connectors, and decorative hardware where both precision and surface finish matter.
None of this makes zinc universally superior to aluminium die casting — larger automotive structural components, for instance, more often favor aluminium's lighter weight. Zinc's advantage is specific to the smaller, more intricate, high-volume part category, not a blanket claim across every die-cast application.
Zinc Price — Last 10 Days
The most recent Zinc price on record (2026-09-17) is Less than One Rupees per gram.
| Date | Price (INR/g) | Change |
|---|---|---|
| 2026-09-17 | ₹0.33 | +0.00 |
| 2026-09-16 | ₹0.33 | 0.00 |
| 2026-09-15 | ₹0.33 | +0.00 |
| 2026-09-14 | ₹0.33 | -0.01 |
| 2026-09-13 | ₹0.34 | +0.00 |
| 2026-09-12 | ₹0.34 | 0.00 |
| 2026-09-11 | ₹0.34 | 0.00 |
| 2026-09-10 | ₹0.34 | -0.01 |
| 2026-09-09 | ₹0.35 | +0.00 |
| 2026-09-08 | ₹0.35 | — |
A Genuinely Different Demand Stream From Galvanizing
It's worth being precise about how die-casting demand relates to zinc's price, because it's easy to conflate it with galvanizing. Galvanizing coats the outside of a steel part with a thin layer of zinc for corrosion protection — the steel remains the structural material, and zinc is a protective skin. Die casting is the opposite relationship: zinc alloy is the structural material of the part itself, consumed in bulk rather than as a thin coating.
That means die-casting demand tracks a somewhat different set of economic signals than galvanizing does — automotive production volumes, consumer electronics and hardware manufacturing output — even though both ultimately draw on the same global zinc supply priced on this page. A slowdown in vehicle production, for instance, can dent die-casting demand for zinc even while construction-driven galvanizing demand stays steady, and vice versa.
Zinc Die Casting — FAQs
Zinc alloys melt at a relatively low temperature compared to aluminium or steel, which makes them easier and cheaper to die-cast — the mold (or "die") lasts longer, cycle times are faster, and the process can hold tighter dimensional tolerances. That combination of properties is what makes zinc the practical choice for small, intricate, high-volume metal parts.
Zamak is the most common family of zinc die-casting alloys, built primarily from zinc with small additions of aluminium, magnesium and copper. It's the material behind a huge share of everyday die-cast zinc parts, from door hardware and toy models to automotive and electronics components.
Common applications include automotive components (door handles, brackets, small housings), hardware (locks, hinges), electronics enclosures, plumbing fixtures, and consumer goods that need a precise, smooth-finished metal part produced in large volumes at relatively low cost per unit.
No — they're separate demand streams that both draw on the same metal. Galvanizing coats steel to prevent corrosion and is by far the largest single use of zinc globally; die casting consumes zinc as the primary structural material of the part itself, a smaller but still meaningful share of total demand, concentrated in automotive, hardware and electronics manufacturing.
